Steering Angle Sensor Removal and Installation (ESP® Model): Installation

WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.

Install steering angle sensor (2) by fitting engagement parts (1) of contact coil cable assembly to claws of steering angle sensor as shown in figure.

Fig 1: Installing Steering Angle Sensor By Fitting Engagement Parts Of Contact Coil Cable Assembly
Courtesy of SUZUKI OF AMERICA CORP.
Install contact coil cable assembly and steering wheel referring to CONTACT COIL CABLE ASSEMBLY REMOVAL AND INSTALLATION and STEERING WHEEL REMOVAL AND INSTALLATION .