LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> SX4 Base >> Repair and Diagnosis >> Electrical >> Gauges >> Instrumentation/Driver Information/Horn >> Repair Instructions >> Combination Meter Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Combination Meter Removal and Installation: Removal

  1. Disconnect negative (-) cable at battery.
  2. Remove dash side trim (1) and steering column hole cover (2).
    Fig 1: Removing Dash Side Trim And Steering Column Hole Cover
    G06869154Courtesy of SUZUKI OF AMERICA CORP.
  3. Remove center ventilation louver with garnish referring to CENTER VENTILATION LOUVER REMOVAL AND INSTALLATION .
  4. Remove combination meter cluster panel (1) pulling it in arrow direction shown in figure.
    Fig 2: Removing Combination Meter Cluster Panel
    G06869155Courtesy of SUZUKI OF AMERICA CORP.
  5. Remove screws (1) fastening combination meter.
  6. Remove combination meter (2) pulling it arrow direction as shown in figure.
    Fig 3: Removing Combination Meter
    G06869156Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals