Front Disc Brake Pad Inspection

Reference: FRONT DISC BRAKE PAD REMOVAL AND INSTALLATION

Check pad lining (1) for wear. When the wear exceeds limit, replace with new one.

CAUTION: If the brake pad lining is polished with sandpaper, abrading particles will be embedded in the lining and will damage the brake disc. Do not polish a rough pad lining with sandpaper. Replace the pad with a new one.

NOTE: When pads are removed, visually inspect caliper for brake fluid leak. Correct leaky point, if any.

Front disc brake pad thickness (lining thickness) "a"

Standard: 10 mm (0.39 in.)

Limit: 2 mm (0.08 in.)

Fig 1: Checking Disc Brake Pad Thickness

Courtesy of SUZUKI OF AMERICA CORP.