Rear Door Glass Removal and Installation: Installation

Reverse removal procedure noting the following instructions.

• Tighten door sash mounting bolts and screw ("1" - "3") according to numerical order as shown in figure.
  Fig 1: Identifying Door Sash Mounting Bolts And Screw

  Courtesy of SUZUKI OF AMERICA CORP.
• If there is deformity for glass run, replace it with a new one.
• Secure door sealing cover (1) with adhesive (2).
  Fig 2: Securing Door Sealing Cover With Adhesive

  Courtesy of SUZUKI OF AMERICA CORP.
• Install rear door trim.

  Rear door trim attaching order 

  (1) → (2) → (3) → (4) → (5) → (6) → (7) 

  Fig 3: Identifying Rear Door Trim Attaching Order

  Courtesy of SUZUKI OF AMERICA CORP.