LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> SX4 Base >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> Repair Instructions >> Windshield Wiper Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Windshield Wiper Removal and Installation: Installation

  1. Install windshield wiper assembly (1), and tighten bolts to specified torque in order of "i", "ii" and "iii" indicated in figure.

    Tightening torque 

    Windshield wiper bolt (a): 8 N.m (0.8 kg-m, 6.0 lbf-ft) 

    Fig 1: Windshield Wiper Bolt Tightening Order
    G06868804Courtesy of SUZUKI OF AMERICA CORP.
  2. Connect coupler to windshield wiper motor.
  3. Install cowl top garnish referring to COWL TOP AND FRONT LOWER CROSSMEMBER COMPONENTS .
  4. Install windshield wiper arms with wiper blades (1) to specified position as shown in figure, and then tighten windshield wiper nuts to specified torque.

    Tightening torque 

    Windshield wiper arm nut (a): 20 N.m (2.0 kg-m, 14.5 lbf-ft) 

  5. Install wiper pivot caps (2) to windshield wiper arm nuts.
    Fig 2: Installing Wiper Pivot Caps To Windshield Wiper Arm Nuts
    G06868805Courtesy of SUZUKI OF AMERICA CORP.
  6. Connect negative (-) cable to battery.
scientia non olet · About LEMON Manuals