Reduction Drive Gear Assembly Disassembly and Reassembly

Reduction Drive Gear Assembly Disassembly and Reassembly

Transfer Dismounting and Remounting

Transfer Assembly Components

Transfer Assembly Disassembly and Reassembly

Disassembly

Remove bearings (1) from reduction drive gear (2) using special tool, bearing puller (3) and hydraulic press (4).
Special Tool

(A): 09913-85230





Reassembly

1) Clean all components thoroughly, inspect them for any abnormality and replace with new one as necessary.
2) Install bearings (1) to reduction drive gear (2) using special tool, bearing puller (3) and hydraulic press (4).
Special Tool

(A): 09913-85230