Control Arm Bushing: Service and Repair

Suspension Arm Bush Disassembly and Reassembly

Suspension Arm Removal and Installation

Disassembly

1) Cut off bush flange (rubber) (1) with knife.





2) Push out bush by using hydraulic press (2) and special tools.

NOTE:
Any removed bush will not fit properly if you reuse it.

Always use a new bush.

Special Tool

(A): 09943-76310

(B): 09913-75821





Reassembly

1) Press-fit new front bush (1) by using special tools and press (2).
Special Tool

(A): 09943-76310

(B): 09913-75821

NOTE:
- Before installing bush, apply soap water on its circumference to facilitate bush installation.





2) Press-fit bush (1) so that dimensions "A" and "B" in figure become equal.