Front Disc Brake Pad Inspection

Front Disc Brake Pad Inspection

Front Disc Brake Pad Removal and Installation

Check pad lining (1) for wear. When the wear exceeds limit, replace with new one.

NOTE:

If the brake pad lining is polished with sandpaper, abrading particles will be embedded in the lining and will damage the brake disc.

Do not polish a rough pad lining with sandpaper. Replace the pad with a new one.

NOTE:

When pads are removed, visually inspect caliper for brake fluid leak. Correct leaky point, if any.

Front disc brake pad thickness (lining thickness)
"a"
Standard: 10 mm (0.39 in.)
Limit: 2 mm (0.08 in.)