Using Recommended Tool ("VT55" made by ATEQ)
WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
- Check each tire for crack, any other damage and air leakage.
- Adjust each tire pressure to 260 kPa.
- Drive vehicle at more than 35 km/h (22 mph) for 10 minutes.
- Connect SUZUKI scan tool to DLC.
- Select "Data List" under "keyless start control module" mode of SUZUKI scan tool.
- Check "ID code" indicated in "Data List" on SUZUKI scan tool.
- Using recommended tool ("VT55" made by ATEQ) (1), activate each tire pressure sensor. Refer to instruction of recommended tool for method of activating tire pressure sensor.
- Check ID code indicated on recommended tool.
- Compare ID code indicated in scan tool with code in recommended tool.