Intermediate Shaft Disassembly and Reassembly: Disassembly

1. Remove oil seal (1) and snap ring (2) from transfer right case (3).
   Fig 1: Identifying Oil Seal, Snap Ring And Transfer Right Case

   Courtesy of SUZUKI OF AMERICA CORP.
2. Tap intermediate shaft (1) from transfer left case (2) side with plastic hammer (3) and remove it together with bearing.
   Fig 2: Tapping Intermediate Shaft From Transfer Left Case

   Courtesy of SUZUKI OF AMERICA CORP.
3. Remove circlip (1) from intermediate shaft (2).
4. Remove intermediate shaft bearing (5) from intermediate shaft by using bearing puller (3) and hydraulic press (4).

Fig 3: Removing Intermediate Shaft Bearing From Intermediate Shaft

Courtesy of SUZUKI OF AMERICA CORP.