Front Window Regulator Assembly Removal and Installation: Installation

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.

Reference: FRONT WINDOW REGULATOR ASSEMBLY INSPECTION

Reverse removal procedure noting the following points.

Apply grease to sliding parts of front window regulator assembly.
: Grease 99000-25011 (SUZUKI Super Grease A)
Tighten each part to specified torque referring to FRONT DOOR COMPONENTS .
Tighten front window regulator bolts in order ("1" to "4") to specified torque.
Tightening torque

Front window regulator bolt (a): 8.4 N.m (0.86 kg-m, 6.5 lbf-ft)

Fig 1: Identifying Front Window Regulator Bolts Tightening Sequence
Courtesy of SUZUKI OF AMERICA CORP.
Initialize power window setup if front window regulator assembly is replaced, see Power Window System Initialization/Reset (Front Windows Only) .