Rear Combination Light Removal and Installation: Installation

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.

Reverse removal procedure noting the following points.

CAUTION: Replace with new gasket if gasket (1) is deformed or torn, or water leakage may be caused.

Fig 1: Identifying Rear Combination Light Gasket

Courtesy of SUZUKI OF AMERICA CORP.

Install rear combination light by pushing it in direction of arrow.
Tighten rear combination light nuts in order of "1", "2" "3" and "4" to specified torque.
Tightening torque

Rear combination light nut (a): 4.5 N.m (0.46 kg-m, 3.5 lbf-ft)

Fig 2: Identifying Rear Combination Light Nuts Tightening Sequence
Courtesy of SUZUKI OF AMERICA CORP.