LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> Kizashi S, FWD, Automatic CVT Trans >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Repair Instructions >> Fuel Level Sensor Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Level Sensor Removal and Installation: Removal

  1. Remove fuel pump assembly from fuel tank, see FUEL PUMP ASSEMBLY REMOVAL AND INSTALLATION .
  2. Disconnect fuel level sensor connector (1).
  3. Release lock (2), remove fuel level sensor (3) from fuel pump (4) by sliding it in arrow direction as shown in figure.
    Fig 1: Identifying Fuel Level Sensor Connector And Fuel Pump
    G06526566Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals