Rear Wheel Speed Sensor Removal and Installation: Installation

Reference: FRONT AND REAR WHEEL SPEED SENSOR INSPECTION 

Reverse removal procedure, noting the following points.

• Check detective area is not covered with iron powder.
• Tighten rear wheel speed sensor bolt (1) and rear wheel speed sensor bracket bolt (2) to specified torque.

  Tightening torque 

  Rear wheel speed sensor bolt (a): 11 N.m (110 kg-m, 8.5 lbf-ft) 

  Rear wheel speed sensor bracket bolt (b): 25 N.m (250 kg-m, 18.5 lbf-ft) 

• Confirm that there is no space between rear wheel speed sensor (3) and suspension knuckle (4).
  Fig 1: Identifying Rear Wheel Speed Sensor Bolt And Rear Wheel Speed Sensor Bracket Bolt

  Courtesy of SUZUKI OF AMERICA CORP.
• Install wheel, see WHEEL (WITH TIRE) REMOVAL AND INSTALLATION .