KIZASHI Alignment Specifications (SI-0007)

Publication date: 2012-01-01
Reference number: SI-0007

KIZASHI ALIGNMENT SPECIFICATIONS

TECHNICAL SERVICE BULLETIN

Reference Number(s): SI-0007, Date of Issue: January 01, 2012

SUZUKI:

2010 - 2012 Kizashi

SERVICE INFORMATION

Please refer to the attached table for the Alignment Specification listings for the Suzuki Kizashi model, presented here in a more universal format. We at A.S.M.C. have made every effort to offer the required alignment specifications in a manner that will work with nearly all measuring standards being used currently in alignment systems.

When performing any alignment activity on Suzuki Automotive product the specifications listed in the corresponding Suzuki Service Manual are the only ones recognized and acceptable when servicing our vehicles. We urge the Technician to utilize these settings, regardless of what the software application loaded by the maker of your alignment equipment calls for.

In the event that your equipment uses a measuring standard not listed or shows a specification which is different from those in the attached table, please contact the Suzuki Technical Hotline for assistance.

NOTE: If the Alignment Machine Display Values from your equipment do not match those called out in the Suzuki Service Manual, there may be software updates available on request from the equipment manufacturer or online from their website. Any update(s) or specifications which do not match the Suzuki specification data should NOT be considered correct for use on any Suzuki Vehicle.

2010 - 2012 Kizashi

Front

Front
				Caster	Toe Settings
Alignment Machine Display		Camber Cross		Cross
Value	Camber	Tolerance	Caster	Tolerance	Individual Wheel Toe	Total Toe
Degrees	- 0.50° ± 1.0°		4.17° ± 1.0°		0.0° ± 0.08°	0.0° ± 0.17°
Degrees & Minutes	- 0° 30' ± 1.0°		4° 10' ± 1.0°		0° 00' ± 0° 05'	0° 00' ± 0° 10'
Inches					0.0in ± 0.04in	0.0" ± 0.08in
Fractions					0.0in ± 3/64in	0.0in ± 5/64in
Milimeters					0.0mm ± 1.05mm	0.0mm ± 2.1mm

Rear
				Caster	Toe Settings
Alignment Machine Display		Camber Cross		Cross
Value	Camber	Tolerance	Caster	Tolerance	Individual Wheel Toe	Total Toe
Degrees	- 1.25° ± .50°				0.08° ± 0.04°	0.17° ± 0.08°
Degrees & Minutes	- 1° 15' ± 0° 30'				0° 05' ± 0° 03'	0° 10' ± 0° 05'
Inches					0.04in ± 0.02in	0.08in ± 0.04in
Fractions					3/64 ± 1/32	5/64 ± 3/64
Milimeters					1.05mm ± 0.55mm	2.1mm ± 1.1mm