MIL Does Not Come ON with Ignition Mode of Keyless Push Start System in "ON" and Engine Stopped (but Engine Can Be Started)

MIL Does Not Come ON with Ignition Mode of Keyless Push Start System in "ON" and Engine Stopped (but Engine Can Be Started)

Troubleshooting

1. DTC check

Check DTC related to CAN communication.

Is there any CAN-DTC(s) detected?
YES -
Go to troubleshooting for applicable DTC.
NO -
Go to Step 2.

2. DTC check

Check DTC for combination meter.

Is there any DTC(s) detected?
YES -
Go to troubleshooting for applicable DTC.
NO -
Replace ECM and recheck DTC. Service and Repair