Rear Brake Pad Inspection

Rear Brake Pad Inspection

Rear Brake Pad Removal and Installation

NOTE:

If the brake pad lining is polished with sandpaper, abrading particles will be embedded in the lining and will damage the brake disc.

Do not polish a rough pad lining with sandpaper. Replace the pad with a new one.

NOTE:

- Check for leakage of brake fluid when removing brake pads and repair brake caliper if leakage is found.
- Replace all the rear brake pads at the same time even if any rear brake pad needs to be replaced.

- Check thickness of brake pad lining. If any lining is thinner than limit or one side is excessively worn, replace all rear brake pads.

Rear brake pad lining thickness
"a"
Standard (new): 9 mm (0.35 in.)
Limit: 1.5 mm (0.06 in.)