C1163

DTC C1163

DTC Detecting Condition and Trouble Area






DTC Confirmation Procedure

1) Push engine switch to change ignition mode to "ON".

DTC Troubleshooting

1.
Was "EPS System Check" performed?
YES -
Go to Step 2.
NO -
Go to "EPS System Check".

2. Steering angle sensor check

Check steering angle sensor. Steering Angle Sensor Inspection

Is it in good condition?
YES -
Substitute a known-good P/S control module and recheck DTC. Service and Repair
NO -
Replace steering angle sensor. Steering Angle Sensor Removal and Installation