B1161

DTC B1161 / B1163

DTC Detecting Condition and Trouble Area






DTC Confirmation Procedure

1) Confirm that ignition mode of keyless push start system is in "OFF".
2) Push engine switch to change ignition mode to "ON".
3) Repeat Step 1) and 2) several times.

DTC Troubleshooting

1. DTC check

Clear DTC. DTC Clearance
Push engine switch to change ignition mode to "OFF".
Perform DTC Confirmation Procedure
and then recheck DTC.

Is DTC B1161 or B1163 still detected?
YES -
Go to Step 2.
NO -
Intermittent trouble.

2. DTC check

Replace steering lock unit. Auto Steering Lock Unit Removal and Installation
Perform DTC Confirmation Procedure
and then recheck DTC.

Is DTC B1161 or B1163 still detected?
YES -
Replace keyless start control module and recheck DTC. Service and Repair
NO -
End. (Steering lock unit was faulty.)