Tightening Torque Specifications
WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara, 2007 Suzuki Grand Vitara, and 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lb-ft | |
| P/S belt tension pulley bolt | 25 | 2.5 | 18.5 |
| Tie-rod end nut | 43 | 4.3 | 31.0 |
| Wheel nut | 100 | 10.0 | 72.5 |
| Tie-rod end lock nut | 65 | 6.5 | 47.0 |
| Steering lower shaft bolt | 25 | 2.5 | 18.5 |
| Gear case high pressure pipe union bolt | 35 | 3.5 | 25.5 |
| Gear case cylinder pipe flare nut | 25 | 2.5 | 18.0 |
| Gear case mounting bolt | 105 | 10.5 | 76.0 |
| Gear case low pressure pipe flare nut | 35 | 3.5 | 25.5 |
| Stabilizer bar mount bracket mount bolt | 60 | 6.0 | 43.0 |
| Tie-rod ball nut | 90 | 9.0 | 65.0 |
| P/S pump mounting bolt | 25 | 2.5 | 18.0 |
| P/S pump high pressure pipe union bolt | 60 | 6.0 | 43.5 |
| P/S pump cover bolt | 28 | 2.8 | 20.5 |
| Pressure switch | 28 | 2.8 | 20.5 |
| Plug | 60 | 6.0 | 43.5 |
| Suction connector bolt | 12 | 1.2 | 9.0 |