CMP (Camshaft Position) Sensor Removal and Installation: Installation

Reference: CMP (CAMSHAFT POSITION) SENSOR INSPECTION 

1. Reverse removal procedure noting the following.
   • Apply engine oil to O-ring of CMP sensor (1).
   • Tighten CMP sensor bolt to specified torque.

     Tightening torque 

     CMP sensor bolt (a): 11 N.m (1.1 kgf-m, 8.5 lbf-ft) 

     Fig 1: Identifying CMP Sensor And Bolt

     Courtesy of SUZUKI OF AMERICA CORP.