Tightening Torque Specifications
| Fastening part | Tightening torque | Note | ||
|---|---|---|---|---|
| N.m | kgf-m | lbf-ft | ||
| Clutch switch lock nut | 7.5 | 0.8 | 5.5 | Refer to CPP Switch (for 4WD Control Module) Removal and Installation |
| Clutch fluid hose bracket nut | 10 | 1.0 | 7.5 | Refer to Clutch Fluid Pipe Removal and Installation |
| Clutch master cylinder attaching nut | 23 | 2.3 | 17.0 | Refer to Clutch Master Cylinder Removal and Installation |
| Clutch operating cylinder assembly mounting bolt | 10 | 1.0 | 7.5 | Refer to Clutch Operating Cylinder Assembly Removal and Installation |
| Clutch fluid pipe flare nut | 16 | 1.6 | 11.5 | Refer to Clutch Operating Cylinder Assembly Removal and Installation |
| Flywheel bolt | 70 | 7.1 | 52.0 | Refer to Clutch Cover, Clutch Disc and Flywheel Removal and Installation |
| Clutch cover bolt | 23 | 2.3 | 17.0 | Refer to Clutch Cover, Clutch Disc and Flywheel Removal and Installation |
NOTE:
The tightening torque(s) also specified in:
Clutch Cover, Clutch Disc and Flywheel Components
Clutch Cover, Clutch Disc and Flywheel Components
Reference:
For the tightening torques of fasteners not specified in this page, refer to: Fastener Information