DTC Troubleshooting
| Step | Action | Yes | No |
|---|---|---|---|
| 1 | Was "Air Bag Diagnostic System Check" performed? | Go to Step 2. | Go to AIR BAG DIAGNOSTIC SYSTEM CHECK . |
| 2 |
Has side-air bag deployed? |
Replace components and perform inspections as directed in REPAIR AND INSPECTION REQUIRED AFTER ACCIDENT . | Go to Step 3. |
| 3 |
Are there signs of impact? |
Replace components and perform inspections as directed in REPAIR AND INSPECTION REQUIRED AFTER ACCIDENT . | Substitute a known-good SDM and recheck. |
NOTE:
Upon completion of inspection and repair work, perform the following items.
- Reconnect all air bag system components and ensure all components are properly mounted.
- Repeat AIR BAG DIAGNOSTIC SYSTEM CHECK to confirm that the trouble has been corrected.
- Clear DTCs of BCM. Refer to DTC CLEARANCE .