Compressor Assembly Removal and Installation: Installation
Reverse removal procedure noting the following instructions.
- If compressor is replaced, pour new compressor oil referring to PRECAUTIONS ON REPLENISHING COMPRESSOR OIL .
- Install accessory (A/C compressor) drive belt referring to ACCESSORY DRIVE BELT REMOVAL AND INSTALLATION .
- Install P/S fluid reservoir from its bracket.
- Fill radiator with engine coolant. Refer to COOLING SYSTEM REFILLING .
- Evacuate and charge system referring to "EVACUATION " and "CHARGE " in OPERATION PROCEDURE FOR CHARGING A/C WITH REFRIGERANT .
- Tighten compressor mounting bolts in numerical order ("1" through "3") to specified torque as shown in figure.
Tightening torque
Compressor mounting bolt (a): 25 N.m (2.5 kgf-m, 18.0 lbf-ft) (by the specified procedure)