Rear Wiper Relay Inspection
WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara, 2007 Suzuki Grand Vitara, and 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
Reference: REAR WIPER RELAY REMOVAL AND INSTALLATION
- Check that there is no continuity between terminal "4" and "5". If there is continuity, replace relay.
- Check that there is continuity between terminal "3" and "5". If there is no continuity, replace relay.
- Connect battery positive (+) terminal to terminal "2" of relay.
- Connect battery negative (-) terminal to terminal "1" of relay.
- Check continuity between terminal "4" and "5". If there is no continuity when relay is connected to the battery, replace relay.