Tightening Torque Specifications
WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara, 2007 Suzuki Grand Vitara, and 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lb-ft | |
| Brake pipe flare nut for M10 | 16 | 1.6 | 11.5 |
| Brake pipe flare nut for M12 | 19 | 1.9 | 14.0 |
| ABS (ESP®) hydraulic unit/control module assembly bolt | 9 | 0.9 | 6.5 |
| ABS (ESP®) hydraulic unit/control module assembly bracket bolt | 25 | 2.5 | 18.0 |
| ABS (ESP®) hydraulic unit/control module assembly bracket nut | 25 | 2.5 | 18.0 |
| Front wheel speed sensor bolt | 11 | 1.1 | 8.0 |
| Front wheel speed sensor harness clamp bolt | 11 | 1.1 | 8.0 |
| Rear wheel speed sensor bolt | 11 | 1.1 | 8.0 |
| Rear wheel speed sensor harness clamp bolt | 11 | 1.1 | 8.0 |
NOTE:
The specified tightening torque is also described in ABS (ESP®) HYDRAULIC UNIT/CONTROL MODULE ASSEMBLY COMPONENTS .
Reference:
For the tightening torque of fastener not specified in this article, refer to appropriate component Fastener Information.