Front Wheel Speed Sensor Removal And Installation: Installation

WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara, 2007 Suzuki Grand Vitara, and 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Reference: FRONT WHEEL SPEED SENSOR INSPECTION

Check that no foreign material is attached to sensor (1) and mating encoder (2).
Install it by reversing removal procedure.
Tightening torque

Front wheel speed sensor bolt a: 11 N.m (1.1 kg-m, 8.0 lb-ft)

Front wheel speed sensor harness clamp bolt b: 11 N.m (1.1 kg-m, 8.0 lb-ft)

CAUTION: Do not pull or twist wire harness more than necessary when installing front wheel speed sensor.
Check that there is no clearance between sensor and knuckle.

Fig 1: Identifying Clearance Between Sensor & Knuckle
Courtesy of SUZUKI OF AMERICA CORP.