LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> Grand Vitara Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Engine Electrical Devices) >> Repair Instructions >> Knock Sensor Removal And Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Knock Sensor Removal And Installation: Removal

WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara, 2007 Suzuki Grand Vitara, and 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative cable at battery.
  2. Remove intake manifold from cylinder head referring to INTAKE COLLECTOR AND INTAKE MANIFOLD REMOVAL AND INSTALLATION .
  3. Disconnect knock sensor connector (1).
  4. Remove knock sensor (2) from cylinder block.
    Fig 1: Locating Knock Sensor On Cylinder Block
    G04807282Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals