Fuel Pressure Regulator Removal And Installation: Installation
WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara, 2007 Suzuki Grand Vitara, and 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
Reference: FUEL PRESSURE REGULATOR INSPECTION
Reverse removal procedure for installation noting the following.
- Replace O-ring with new one using care not to damage it.
- Apply thin coat of fuel to O-ring and then install fuel pressure regulator (1) to delivery pipe.
- Tighten fuel pressure regulator bolts to specified torque.
Tightening torque
Fuel pressure regulator bolt: 11 N.m (1.1 kg-m, 8.0 lb-ft)
- After installation, with engine OFF and ignition switch ON, check for fuel leaks around fuel line connection.