Electric Throttle Body Assembly Removal And Installation: Installation

WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara, 2007 Suzuki Grand Vitara, and 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Reverse removal procedure for installation noting the following.

Clean mating surfaces and use new throttle body gasket (1).

Fig 1: Identifying Throttle Body Gasket
Courtesy of SUZUKI OF AMERICA CORP.
Use new fuel connector pipe gaskets.
Tighten fuel connector pipe union bolts and delivery pipe bolts to specified torque referring to FUEL SYSTEM COMPONENTS .
Use new surge tank pipe gaskets.
Check to ensure that all removed parts are back in place.
Reinstall any necessary parts which have not been reinstalled.
Refill cooling system referring to COOLING SYSTEM FLUSH AND REFILL .
Upon completion of installation, verify that there is no fuel leakage at each connection according to FUEL LEAKAGE CHECK PROCEDURE .