Tie-Rod End Removal And Installation: Removal

WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara, 2007 Suzuki Grand Vitara, and 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Hoist vehicle and remove wheel.
Remove tie-rod end nut (3).

Fig 1: Identifying Tie-Rod End Nut
Courtesy of SUZUKI OF AMERICA CORP.
Disconnect tie-rod end (1) by using puller (2).

Fig 2: Disconnecting Tie-Rod End
Courtesy of SUZUKI OF AMERICA CORP.
To facilitate adjustment after installation, put a mark (2) on tie-rod thread indicating position of tie-rod end lock nut (3). Then loosen lock nut (3) and remove tie-rod end (4) from tie-rod (1).

Fig 3: Identifying Tie-Rod End Lock Nut

Courtesy of SUZUKI OF AMERICA CORP.