DTC Troubleshooting
| Step | Action | Yes | No |
|---|---|---|---|
| 1 | Was "Electronic Stability Program Check" performed? | Go to Step 2. | Go to ELECTRONIC STABILITY PROGRAM CHECK . |
| 2 | DTC check for ESP®
Is there any DTC(s) other than C1075 and C1079? |
Go to applicable DTC diag. flow. | Go to step 3. |
| 3 | Check sensor calibration
Is DTC C1079 still detected? |
Substitute a known-good Steering angle sensor and recheck. If this DTC is detected again, substitute a known-good ESP® hydraulic unit/control module assembly. | Calibration was incomplete. |