DTC Clearance

Set ignition OFF.
Connect SUZUKI scan tool to DLC (1).
Special Tool

(A): SUZUKI scan tool (SUZUKI-SDT)

Fig 1: Connecting Suzuki Scan Tool To DLC (1)
Courtesy of SUZUKI OF AMERICA CORP.
Set ignition ON.
Erase DTC according to instructions displayed on scan tool. Refer to SUZUKI scan tool operator's manual for further details.
NOTE:
If communication between SUZUKI scan tool and headlight auto leveling control module is not possible, check related items according to the following points for recovery.
- SUZUKI scan tool and communication cable
- DLC power circuit and ground circuit
- CAN communication system malfunction ("Control Module Communication Bus Off" is detected in any control module.)
- Check power supply and ground circuit of headlight auto leveling control module.
After completing clearance, set ignition OFF and disconnect SUZUKI scan tool from DLC.