Receiver Dryer: Service and Repair

Desiccant Removal and Installation

Removal

1) Remove condenser assembly from vehicle referring to A/C Condenser Assembly Removal and Installation A/C Condenser Assembly Removal and Installation.
2) Remove circlip (4) using special tool.
Special Tool
09900-06107

3) Remove the filter (1) from the receiver / dryer tank (2).
4) Remove desiccant (3).






Installation

Reverse removal sequence to install desiccant, according to instruction manual with supply parts.

NOTE:

- Replenish compressor with specified amount of compressor oil from suction side referring to Precautions on Replenishing Compressor Oil Precautions on Replenishing Compressor Oil.
- Install circlip (1) as shown in figure.