Side Ventilation Louver Removal and Installation

Side Ventilation Louver Removal and Installation

Removal

1) Remove steering column hole cover.
2) Remove instrument panel referring to Service and Repair Instrument Panel Removal and Installation.
3) Remove screws and claws (3), and then remove defroster duct (2) from instrument panel.
4) Remove ventilator duct (1) from instrument panel.











5) Remove side ventilation louver (1) from instrument panel while pressing claws (2).






Installation

1) Reverse removal procedure, noting the following.
- Install side ventilation louver (1) to instrument panel (2) as shown in figure.





- When installing defroster duct to instrument panel, put claws of defroster duct into hole of ventilator duct surely.