DTC Confirmation Procedure
- If DTC Confirmation Procedure has been previously conducted, always perform the following before conducting the next step.
- Turn ignition switch OFF and wait at least 10 seconds.
- Turn ignition switch ON.
- Turn ignition switch OFF and wait at least 10 seconds.
- 2)Turn ignition switch ON, wait at least 10 seconds.
- Turn ignition switch OFF, wait at least 5 minutes.
- Turn ignition switch ON, wait at least 10 seconds.
- Repeat steps 2 to 3 for 5 times.
- Check 1st trip DTC.
- If 1st trip DTC is detected, go to [Diagnosis Procedure ].