Removal And Installation: Installation

Install the oil pan magnets as shown.

Fig 1: Identifying Oil Pan Magnets
Courtesy of SUZUKI OF AMERICA CORP.
Install the oil pan with new oil pan gasket.

Fig 2: Identifying Oil Pan Bolts
Courtesy of SUZUKI OF AMERICA CORP.
CAUTION:
- Be sure the oil drain plug is located to the rear of the transmission assembly.
- Before installing oil pan bolts, remove any traces of old sealant from the sealing surfaces and threaded holes.
- Do not reuse old gasket, replace with a new one.
- Always replace the oil pan bolts as they are self-sealing.
- Partially install the oil pan bolts in a criss-cross pattern to prevent dislocation of the gasket.
Tighten oil pan bolts in numerical order as shown.

Fig 3: Identifying Oil Pan Bolts Tightening Sequence
Courtesy of SUZUKI OF AMERICA CORP.

Oil pan bolts: 7.9 N.m (0.81 kg-m, 70 in-lb)
Refill the A/T with fluid and check for fluid leakage. Refer to [CHECKING THE A/T FLUID (ATF) ].