Operating Cylinder: Removal and Installation: Installation

WARNING: This page is about a different variant/trim than selected.

Installation is in the reverse order of removal.

Operating cylinder bolts 35.3 N.m (3.6 kg-m, 26 ft-lb)

Tighten the clutch hose fitting to the specified torque.
Clutch hose fitting Refer to [ Clutch Piping: Exploded View ].

CAUTION: Make sure the clutch hose is not bent or twisted.

CAUTION: Do not reuse copper sealing washer.
After installation, bleed the clutch hydraulic system. Refer to [CLUTCH FLUID: BLEEDING ].