Front Door Glass Regulator: On-Vehicle Repair: Removal

Remove the front door finisher. Refer to [DOOR FINISHER: REMOVAL AND INSTALLATION ]
Position the vapor barrier aside.
If equipped, temporarily reconnect the power window switch.
For power windows, operate the power window switch to raise/lower the door window until the glass bolts can be seen.

Fig 1: Locating Front Door Glass Bolts
Courtesy of SUZUKI OF AMERICA CORP.
For manual windows, temporarily reinstall the window crank handle and lower the window until the glass bolts can be seen.
Remove the glass bolts.
Raise the front door glass and hold it in place with suitable tool (A).

Fig 2: Identifying Front Door Glass & Suitable Tool (A)
Courtesy of SUZUKI OF AMERICA CORP.
If equipped, disconnect the harness connector from the regulator assembly.
Remove the bolts and the regulator assembly.
NOTE: Power window shown, manual window similar.

Fig 3: Locating Front Regulator Assembly Bolts
Courtesy of SUZUKI OF AMERICA CORP.