LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension & Wheel Alignment >> Repair Instructions >> Stabilizer Bar: Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Stabilizer Bar: Removal and Installation: Removal

  1. Remove the front valance center.
  2. Remove engine undercover using power tool.
  3. Remove connecting rod nuts using power tool, as shown in illustration.
    Fig 1: Locating Connecting Rod Nuts
    G06444687Courtesy of SUZUKI OF AMERICA CORP.
  4. Loosen top bolts for stabilizer bar mounting brackets, then remove lower bolts from mounting brackets and remove stabilizer bar.
  5. Remove bushings from stabilizer bar.
scientia non olet · About LEMON Manuals