LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag System >> Diagnostic Information and Procedures >> Self-Diagnosis Function (Without SDT) >> Diagnostic Procedure 3 >> Final Check of SRS Using SDT-Diagnosis Mode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Final Check of SRS Using SDT-Diagnosis Mode

  1. Connect SDT.
  2. If no DTC is detected on "DTC check", repair of SRS is completed. Go to step 3. If any DTC is detected on "DTC check", the malfunctioning part has not been repaired completely or another malfunctioning part is being detected. Perform DIAGNOSTIC PROCEDURE 2. Refer to [SRS OPERATION CHECK ].
  3. Touch "Clear".
    NOTE: Touch "Clear" to clear the memory of the malfunction (DTC check). If the memory of the malfunction in "DTC check" is not erased, the User mode shows the system malfunction by the operation of the warning lamp even if the malfunction is repaired completely.
  4. Touch "BACK" key of SDT. Touch "DTC check".
  5. Check that no malfunction is detected on "DTC check".
  6. Touch "BACK" key of SDT to return to User mode from Diagnosis mode.
  7. Turn ignition switch OFF and then turn off and disconnect SDT.
  8. Go to [SRS OPERATION CHECK ].