On Board Diagnosis Logic
WARNING: This page is about a different variant/trim than selected.
DTC DETECTING CONDITION AND POSSIBLE CAUSE
| DTC No. |
Trouble diagnosis name |
DTC detecting condition |
Possible cause |
P0340
0340 (Bank 1) |
Camshaft position sensor (PHASE) circuit |
- The cylinder No. signal is not sent to ECM for the first few seconds during engine cranking.
- The cylinder No. signal is not sent to ECM during engine running.
- The cylinder No. signal is not in the normal pattern during engine running.
|
- Harness or connectors (The sensor circuit is open or shorted)
- Camshaft position sensor (PHASE)
- Camshaft (Intake)
- Starter motor
- Starting system circuit
- Dead (Weak) battery
|
P0345
0345 (Bank 2) |