LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission System) >> Repair Instructions >> Front Sun Gear, 3rd One-Way Clutch: Disassembly and Assembly >> Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Sun Gear, 3rd One-Way Clutch: Disassembly and Assembly: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Install 3rd one-way clutch in front sun gear.
    Fig 1: Installing 3rd One-Way Clutch In Front Sun Gear
    G06443018Courtesy of SUZUKI OF AMERICA CORP.
    CAUTION: Apply ATF to 3rd one-way clutch.
  2. Install snap ring in front sun gear using suitable tool.
    Fig 2: Installing Snap Ring In Front Sun Gear
    G06443019Courtesy of SUZUKI OF AMERICA CORP.
  3. Check operation of 3rd one-way clutch.
    1. Hold oil pump assembly and turn front sun gear.
      Fig 3: Checking Operation Of 3rd One-Way Clutch
      G06443020Courtesy of SUZUKI OF AMERICA CORP.
    2. Check 3rd one-way clutch for correct locking and unlocking directions.
      CAUTION: If not as shown, check installation direction of 3rd one-way clutch.