LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission System) >> Diagnostic information and Procedures >> In "P" Position, Vehicle Moves When Pushed >> Diagnostic Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Procedure

WARNING: This page is about a different variant/trim than selected.
DIAGNOSTIC PROCEDURE

Step Action YES NO
1  CHECK PNP SWITCH CIRCUIT 
Perform "DTC check". Refer to [SDT FUNCTION (AT) ].
Do "DTC check" results indicate PNP switch? 		 Check the malfunctioning system. Refer to DTC P0705 PARK/NEUTRAL POSITION SWITCH  . GO TO 2.
2  CHECK CONTROL CABLE 
Check the control cable.

OK or NG 		 GO TO 3. Adjust control cable. Refer to [SHIFT CONTROL SYSTEM: INSPECTION AND ADJUSTMENT ].
3  CHECK A/T FLUID CONDITION 
  1. Remove oil pan. Refer to [OIL PAN: REMOVAL AND INSTALLATION ].
  2. Check A/T fluid condition. Refer to [CHECKING THE A/T FLUID (ATF) ].

OK or NG 		 INSPECTION END  GO TO 4.
4  DETECT MALFUNCTIONING ITEM 
  • Check the malfunction items. If any items are damaged, repair or replace damaged parts. Refer to [SYMPTOM CHART ] (Symptom No. 58).

OK or NG 		 INSPECTION END  Repair or replace damaged parts.
scientia non olet · About LEMON Manuals