With SDT
WARNING: This page is about a different variant/trim than selected.
- Turn ignition switch "ON". (Do not start engine.)
- Select "Data list" mode for "AT" with SDT.
- Start engine.
- Drive vehicle and maintain the following conditions for at least 5 consecutive seconds.
ACCELE POSI: 1.5/8 - 2.0/8
SLCT LVR POSI: "D" position
GEAR: 3rd 4th Gear (FR/B ON/OFF)
Driving location: Driving the vehicle uphill (increased engine load) will help maintain the driving conditions required for this test.
- If DTC is detected go to [Diagnosis Procedure ].