Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Blower Motor Control Module Screws (2 Of 2)

Courtesy of SUZUKI OF AMERICA CORP.

Install the blower motor control module to the HVAC module.
CAUTION: Refer to FASTENER NOTICE .
Install the blower motor control module screws to the HVAC module.
Tightening torque

Tighten the screws to 1.5 N.m (13 lb in).
Connect the electrical connector to the blower motor control module.