LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Heater And Ventilation) >> Repair Instruction >> Air Temperature Actuator Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the air temperature actuator with the door shaft and rotate into position.
    CAUTION: Refer to FASTENER NOTICE .
  2. Install the air temperature actuator screws to the HVAC module.

    Tightening torque 

    Tighten the screws to 1.5 N.m (13 lb in). 

  3. Connect the electrical connector to the air temperature actuator.
    NOTE: Any time an actuator or the HVAC control module is replaced, the HVAC control module must be calibrated to ensure proper air distribution.
  4. Calibrate the actuators. Refer to ACTUATOR RECALIBRATION .
  5. Cycle the ignition and verify proper operation.
  6. Install the I/P compartment. Refer to INSTRUMENT PANEL COMPARTMENT REPLACEMENT .
scientia non olet · About LEMON Manuals