LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Parking Brake) >> Repair Instructions >> Parking Brake Front Cable Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Front Park Brake Cable To Park Brake Lever
G04843936Courtesy of SUZUKI OF AMERICA CORP.
  1. Install the front park brake cable to the park brake lever.
  2. Install the rear cable ends to the cable equalizer.
    Fig 2: Identifying Washer & Adjusting Nut
    G04843937Courtesy of SUZUKI OF AMERICA CORP.
  3. Using ONLY hand tools, install the washer and NEW adjusting nut (1) to the front park brake cable.
  4. Adjust the park brake cable tension. Refer to PARK BRAKE ADJUSTMENT .
  5. Install the front floor console. Refer to CONSOLE REPLACEMENT .
  6. Enable the SIR system. Refer to SIR Disabling and Enabling .