LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Hood/Fenders/Doors) >> Repair Instructions >> Front Side Door Window Channel Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Window Weatherstrip Run Channel Assembly (1 Of 2)
G04844640Courtesy of SUZUKI OF AMERICA CORP.
  1. Lower the front door window.
  2. Remove the front door trim panel. Refer to FRONT SIDE DOOR TRIM PANEL REPLACEMENT .
  3. Remove the inner belt seal. Refer to FRONT SIDE DOOR WINDOW BELT INNER SEALING STRIP REPLACEMENT .
  4. Starting at one end, carefully pull the window weatherstrip run channel assembly from the door frame.


  1. Remove the front door window. Refer to REMOVAL PROCEDURE .
  2. Remove the front door window weatherstrip run channel assembly. Refer to REMOVAL PROCEDURE .
  3. Remove the outside rearview mirror. Refer to REMOVAL PROCEDURE .
  4. Remove the front door frame applique. Refer to FRONT DOOR FRAME APPLIQUE REPLACEMENT .
    Fig 1: Identifying Front Door Window Run Channel & Seal (1 Of 2)
    G04844642Courtesy of SUZUKI OF AMERICA CORP.
  5. Remove the window run channel bolts.
  6. Remove the front door window run channel. Starting from the rear corner of the door, remove the seal from the door header flange.
scientia non olet · About LEMON Manuals