Fastener Tightening Specifications - Interior Trim and Paneling
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
FASTENER TIGHTENING SPECIFICATIONS
| Application | Specification | |
|---|---|---|
| Metric | English | |
| D-Ring Bolts | 50 N.m | 37 lb ft |
| Rear Compartment Stowage Tray Bolts | 7 N.m | 62 lb in |
| Rear Seat Anchor Plate Bezel Screws | 2 N.m | 18 lb in |
| Rear Quarter Lower Trim Panel Screws | 2.5 N.m | 22 lb in |
| Windshield Garnish Molding Screws | 9 N.m | 80 lb in |